Welcome to Shenzhen Junhai Longfei Technology Co., Ltd.!
Consultation Hotline:4001800957
English
CN

Some common sense about touch one machine

1. The film surface of the touch screen is the touch surface, that is to say the front of the product; the glass surface is the non-touch surface, which is the back of the product.


     2. No folding is allowed at any part of the lead-out line. The lead-out wire must be inserted horizontally during assembly, and cannot be inserted in half at the root of the reinforcing plate.


     3. When picking and placing the product, a single piece of operation is required. Handle gently to avoid scratching the product surface by bumping the products against each other.


     4. Do not stack touch screen, use tray.


     5. Finally, please note: Do not use corrosive organic solvents to wipe the surface of the touch screen film. Such as industrial alcohol.


     6. The touch screen part is made of glass, and the edges and corners of the glass are relatively sharp, so you need to wear gloves/finger sleeves for assembly.


     7. The touch screen part is fragile glass. Do not exert strong impact on the touch screen during assembly.


     8. Avoid taking the lead directly to pick up the touch screen, and avoid pulling the lead line.


     9. Bending action cannot be performed on the lead plate reinforcement plate.


     10. When cleaning the surface of the product, please wipe it with a soft cloth (deerskin) dipped in petroleum ether.


Copyright © Shenzhen Junhai Longfei Technology Co., Ltd. Guangdong ICP No.19089823   Baidu Statistics
Technical support:SZTD